SquintPRO
Video management system (VMS): what it does, and what video analytics adds
A VMS records and plays back. Video analytics watches. See where one ends and the other begins, on the cameras you already own.
Explainer Published 6 min read
- Runs on existing IP cameras (RTSP/ONVIF)
- Licensed per camera stream, every use included
- On-premise or cloud
Teams we work with on SquintPRO
A video management system (VMS) is the software that connects to cameras, records their video, and lets operators view and search it by time. It does not understand what is in the picture. AI video analytics adds that: it detects events such as a missing helmet or a vehicle plate and raises an alert, using the same cameras.
VMS and video analytics side by side
| Point | Video management system (VMS) | AI video analytics |
|---|---|---|
| Main job | Connects to the cameras, records their video, and shows it live and in playback | Watches the video for the events you choose and raises an alert when one happens |
| Search | By camera, date and time | By what happened: an event type, or a typed description of what you are looking for |
| Alerts | Mostly technical: a camera offline, a recording fault, or basic motion in a zone where it is set up | One alert per detected event, with a short clip an operator can check |
| Who uses it | Control-room operators, security staff, and investigators reviewing footage | The same operators, plus HSE and operations teams who receive alerts on their own events |
| What it needs from the camera | A video stream it can record | An IP stream over RTSP or ONVIF, and a view that shows the subject clearly enough for the use case |
| What it does not do | Understand what is in the picture | Take over recording and playback: these stay on the VMS or NVR. SquintPRO also does not identify people: there is no face recognition |
Two jobs on the same cameras
Video management system
-
Cameras
IP cameras on the site network
-
VMS
record live view playback by time -
Operator
watches the screens and searches by camera and time
Video analytics with SquintPRO
-
The same cameras
streams over RTSP or ONVIF, from the camera or the recorder
-
SquintPRO
detect alert search by description -
Alert with a clip
into the VMS or the control room
The VMS keeps recording and playback. Analytics reads the same streams and sends its alerts back to the screens operators already watch.
What a VMS does well
A video management system is the software layer between the cameras and the people who watch them, and it does four jobs well:
- It connects many cameras, often of different ages and types, and keeps them in one list.
- It records, around the clock or on a schedule, and keeps the footage for the period you set.
- It shows live views on control-room screens, in layouts arranged by site or by zone.
- It plays footage back by camera and time, exports clips for an investigation, and controls who may see which camera.
Smaller sites often record on a network video recorder (NVR), a device that records a group of cameras. Larger sites usually run a VMS that brings every camera and recorder into one control room.
Where a VMS stops
A VMS stores and shows what the cameras see; it does not tell anyone what happened. A control room watches a few screens at a time while a site may have hundreds of cameras, so most footage is never seen. A worker without a helmet near a crane, or smoke in a store room, is on the recording, and nobody learns of it until someone goes looking.
Read more
Then the search is by time: an operator picks the cameras that might have seen the event and plays them at speed, which can take hours. This is the gap video analytics fills: it watches every connected stream for the events you choose, and AI video search finds past moments by a typed description instead of by scrolling.
Which questions each one answers
| The question | Who answers it |
|---|---|
| "Show me gate 3 at 02:10 last night." | The VMS: playback by camera and time |
| "Export the loading-bay clip for the investigation." | The VMS: clip export with access control |
| "Tell me when a person enters the yard after hours." | Video analytics: a restricted-area alert during the hours you set |
| "Tell me when someone works near the crane without a helmet." | Video analytics: protective-equipment and proximity alerts |
| "Where did the white pickup go after it came in?" | Video analytics: search by description, then tracking across cameras |
| "Which vehicles came through the north gate today?" | Video analytics: number plate reading, each read with its time and image |
How SquintPRO works next to a VMS
SquintPRO adds analysis to the cameras and recorders you already run. A stream reaches it in one of two ways, and most sites use a mix of both:
- From the camera. SquintPRO opens the camera's RTSP stream directly. Where a camera offers a high-resolution main stream and a lighter sub-stream, the survey picks the one with enough detail for the use case.
- From the recorder. Where the VMS or NVR already receives every camera and can pass streams on, SquintPRO takes them from there, once the survey confirms the recorder has the capacity.
Recording stays where it is. SquintPRO does not replace your VMS or NVR: it sends each alert, with a short clip, back to them or to your control room. The camera compatibility guide covers what the survey checks.
Relatedcamera compatibility guide
Five questions before adding analytics
- Are the cameras IP cameras? Analytics reads a network video stream. If you are weighing new cameras against your current ones, AI cameras or AI on existing cameras sets out both routes.
- Do they support RTSP or ONVIF? These open protocols let the stream be read from the camera or from the recorder, without a proprietary camera.
- Where will the video be processed? On-premise, on a server at your site, so footage stays there; or in the cloud, with a link that can carry the streams.
- Who receives the alert? The control room, the VMS screen, or the HSE or security team, and what each one does next.
- Which event do you want to detect first? Start with the one or two that matter most, proven on your own footage.
Questions about video management systems
What is a video management system?
A video management system (VMS) is the software that connects to cameras, records their video, and lets operators view and search it by time. It shows live views on control-room screens, plays recordings back by camera and time, exports clips for an investigation, and controls who may see which camera. It runs on servers at the site or in a data centre.
What is the difference between a VMS and an NVR?
An NVR (network video recorder) is a recording device; a VMS is software that manages cameras, recording and viewing, and can work across several recorders. A small site often records on one NVR and views it on a local screen. A larger site, or a group of sites, usually runs a VMS that brings every camera and recorder into one control room.
Does video analytics replace the VMS?
In most cases, no: video analytics works beside the VMS, on the same camera streams. The VMS keeps recording, live view and playback. SquintPRO adds detection and sends each alert, with a short clip, back to the VMS or to the control room, so operators keep the screens and procedures they already know.
Can analytics run on the cameras we already have?
Yes, if they are IP cameras that support RTSP or ONVIF, and a survey confirms which ones suit each use case. The angle, the size of the subject in the picture and the lighting at night decide whether a view works. The survey lists which cameras are usable as they are and which need adjustment; see what makes a camera compatible.
Where is the video processed?
On-premise or in the cloud, as you choose. On-premise, a GPU server at your site analyses the streams, and footage does not leave the site. In the cloud, a unit on site collects the streams in scope and sends them for analysis, and analysed footage is kept for 3, 6 or 12 months, chosen at the start.
Next
Read next
Next step
Ask an engineer one question
Tell us what records your cameras today and the first event you want to detect, and ask one question about adding analytics next to your VMS.
What happens next
- We read your request
- An engineer contacts you
- You get an estimate or a demo
Or directly
+966-11-2180999 [email protected]Tawuniya Towers, North Tower, 7th Floor, King Fahad Highway, Olaya, P.O. Box 56835, Riyadh 11564, Saudi Arabia





